User guide

UM-00003
www.netcommwireless.com
NTC-30WV – Outdoor HSPA+ WiFi Router with Voice
11
Interfaces
The following interfaces are available on the NTC-30WV:
1 2 3 4 5 6
Figure 5 - Bottom Mounted Interfaces
ITEM
INTERFACE
FUNCTION
1
WiFi Antenna Connector (TNC)
Connect one of the WiFi antennas here.
2
DC Power Port
Connect the optional DC Power supply to the NTC-30WV.
3
10/100Base-TX Ethernet RJ-45 (w/Auto MDX) Port
Connect the NTC-30WV to an Ethernet enabled device or Switch and deliver power
through Power over Ethernet (PoE) technology.
4
RJ-11 Port.
An analogue phone handset can be connected to the RJ-11 to make calls over the 3G
network.
5
Mini USB 2.0 Console Port
Connect a Mini USB cable to access the NTC-30WV console.
Reset
Reset the NTC-30WV to Factory Defaults.
SIM Card Reader
Insert an active SIM to provide 3G connectivity.
6
WiFi Diversity Antenna Connector (TNC)
Connect one of the WiFi antennas here.
Table 8 - Bottom Mounted Integrated Interfaces
1 2
Figure 6 - Top Mounted Interfaces
ITEM
INTERFACE
FUNCTION
1
1 x 3G Main antenna connector (Type N)
Connect one of the 3G antennas here.
2
1 x 3G Aux antenna connector (Type N)
Connect one of the 3G antennas here.
Table 9 - Top Mounted Interfaces