User Guide

Tangerine Telecom © 2022
tangerinetelecom.com.au
10
| FTTN/B Connections
Step 4
After you have connected the modem to the wall socket and powered it up, wait up to five minutes, after
which the lights on the modem should stop flashing and become steady. This shows you that you have
successfully connected the modem to the line that NBN is active on. If they don’t not stop flashing, you
should try alternative telephone wall sockets in the property until it does.
Once successfully connected to the network, the Power, WAN & WiFi 2.4 – 5 lights will display a steady green
light. The internet light will be flashing.
Final Steps
After you’ve completed the steps to connect your NetComm NF18MESH modem, wait up to 20 mins to
connect to your devices.
Once connected, run a test to check the speed of your connection at
www.speedtest.net
If the modem is still not connected after 20 minutes, please contact our technical support team for further
assistance:
Technical Support
If you require assistance setting up your BYO device our team is available.
8AM – 10PM WEEKDAYS,
8AM – 8PM SAT & SUNDAY AET
Phone:
1800 211 112
Live Chat:
www.tangerinetelecom.com.au