User guide

www.netcomm.com.au
NetComm
3G3
9
W
-
I
-
HSPA+ WiFi Router
User Guide
39
YML39W
-
I
Administration
Start Wizard
If you wish to re-run the initial setup wizard, you can do so by moving the mouse over Administration, and clicking on “Start Wizard”.
Management
This page allows you to configure administrator system settings including the administrator username and password, NTP settings,
and DDNS settings.
Figure 40 - Advanced View - Management Settings
OPTION DEFINITION
Administrator Settings (account/password): Configure a new administrator username and password.
NTP Settings:
The NTP (Network Time Protocol) settings allow your router to synchronize its internal clock with
the global Internet Time. These settings will affect functions such as System Log entries and
Firewall settings.
Green AP:
To provide optional reduction in power usage, you can assign a particular time to reduce the WiFi
power output. Please note that a reduction in the WiFi power output can potentially reduce
coverage, data throughput speeds, and stability. If you are having problems with your WiFi
coverage, stability, or throughput speed, please disable the Green AP functionality.
DDNS Settings:
DDNS (Dynamic Domain Name Service) allows you to map a static domain name to a dynamic IP
address. To use this features, you must sign up for an account from a DDNS service provider.
This router supports DynDNS, FreeDNS, and other common DDNS service providers.
Enter the account details provided by your Dynamic DNS service provider and click Apply.
Table 29 - Advanced View - Management Settings
Click ‘Apply’ to save any changes to the settings.