Manualshelf

Quick Start Guide

ManualsBrandsNetComm ManualsComputers & Accessories4G LTE Cat 1 Industrial IoT Router, Vodafone MachineLink 4G Lite
12345678910
| Industrial IoT
10
2. Wall mounted via DIN
rail bracket
Horizontal DIN rail mounting adapter
Used in conjunction with the DIN rail mounting bracket, this adapter lets you
mount the NTC-220 in a horizontal orientation. With the DIN rail mounting bracket
attached to the router, slide the adapter on to the bracket as shown in the image
below. You can then mount the device horizontally on a DIN rail. Optionally, you
may place a screw (max. 4.5mm diameter) through the centre hole of the adapter
so that it doesn’t move along the DIN rail.
3. Ceiling mount via DIN rail
bracket