Quick Start Guide

7
Step 3
Mount your router in a suitable location using the options listed in the
Mounting options section.
When selecting a location to mount the MachineLink 4G Lite router,
keep in mind that it features high performance antennas designed to
provide optimum signal strength in a wide range of environments. You
can check the signal strength by observing the colour and number of
LEDs illuminated on the front of the device. For a precise reading of
the signal strength, refer to the Status page on the web user interface.
If you nd the signal strength is weak, try moving the router to a
different place, mounting it differently or changing the orientation of
the antennas.
The signal strength LEDs update within a few seconds with a rolling
average signal strength reading. When selecting a location for the
router, please allow up to 20 seconds for the signal strength LEDs to
update before repositioning.
Please refer to the Device overview section for the antenna socket
layout. If you have purchased a GPS antenna, remove the socket cap
from the GPS antenna socket and attach the antenna to the socket in
the same manner.