User's Manual

16
Wireless LAN
connection
The MachineLink 4G router can operate as both an access point and a
WiFi client simultaneously, if required. By default the MachineLink 4G
router has the wireless access point disabled. If you want to use this
functionality you must enable it rst.
To enable the wireless access point on the MachineLink 4G router:
1. From the top menu bar, select the Networking option.
2. Select Wireless settings on the left, then select the AP basic
settings menu item.
3. Click the AP mode toggle key so that it is in the ON position then
click the Save button.
The wireless access point is enabled. Continue to the next section to
connect a wireless client to the MachineLink 4G access point.
Connecting a wireless client to the MachineLink 4G
access point
The WiFi Network Name (SSID) and WiFi Security Key are unique for
your device and are printed on the back of your MachineLink 4G
router. The credentials are also printed on the WiFi Activation Card.
QSG-00075 rev 7 - MachineLink 4G QSG.indd 16 21/06/2016 10:20 AM