User's Manual
11
Signal
strength
On LTE
On WCDMA signal
On GSM/GPRS signal
WiFi
Off Radio off
On WiFi Access Point or both WiFi
Access Point and WiFi Client mode
are enabled.
Blinking Trafc via WiFi in AP, client or dual
AP/client mode
On WiFi Client mode is enabled, WiFi
Access Point is disabled
Blinking
Trafc via WiFi in client mode
1 The term “blinking” means that the LED may pulse, with the intervals that the LED is on and
off not being equal. The term “ashing” means that the LED turns on and off at equal intervals.
QSG-00075 rev 7 - MachineLink 4G QSG.indd 11 21/06/2016 10:20 AM