User's Manual

LED indicators
The CDMA M2M Router uses 7 LEDs to display the current system and connection status.
Figure 2 - CDMA M2M Router LED Indicators
LED
ICON
NAME COLOR STATE DESCRIPTION
Power
Off Power off
Double flash Powering up
On Power on
On Power on in recovery mode
Slow flashing Hardware error
Network
On Connected via WWAN
Blinking
1
Traffic via WWAN
Slow flashing Connecting data session
On Registered network
Slow flashing Registering network
On Can’t connect
Signal
strength
On EVDO coverage
On CDMA 1x coverage
Table 3 - LED Indicators
1
The term “blinking” means that the LED may pulse, with the intervals that the LED is on and off not being equal. The term “flashing” means
that the
LED turns on and off at equal intervals.
8
NetComm Wireless CDMA M2M Router
www.netcommwireless.com