User's Manual

SMS Diagnostics and Commands
SMS messaging
The CDMA M2M router offers an advanced SMS feature set, including sending messages, receiving messages, redirecting
incoming messages to another destination, as well as supporting remote commands and diagnostics messages.
Some of the functions supported include:
Ability to send a text message via a CDMA network and store it in permanent storage.
Ability to receive a text message via a CDMA network and store it in permanent storage.
Ability to forward incoming text messages via a CDMA network to another remote destination which may be a
TCP/UDP server or other mobile devices.
Ability to receive run-time variables from the device (e.g. uptime) on request via SMS
Ability to change live configuration on the device (e.g. network username) via SMS.
Ability to execute supported commands (e.g. reboot) via SMS
Ability to trigger the CDMA M2M router to download and install a firmware upgrade
Ability to trigger the CDMA M2M router to download and apply a configuration file
To access the SMS messaging functions of the CDMA M2M router, click on the Services menu item from the top menu bar, and
then select one of the options under the SMS messaging section on the left hand menu.
Setup
The Setup page provides the options to enable or disable the SMS messaging functionality and SMS forwarding functionalities
of the router. SMS messaging is enabled by default.
Figure 71 - General SMS Configuration
www.netcommwireless.com
NetComm Wireless CDMA M2M Router
67