User's Manual

Figure 57 - OpenVPN P2P mode settings

4. Use the Server port field to select a port number and then use the drop down list to select a packet type to use for the

OpenVPN server. The default OpenVPN port is 1194 and default packet type is UDP.

5. In the Local IP Address and Remote IP Address fields, enter the respective local and remote IP addresses to use for

the OpenVPN tunnel. The slave should have the reverse settings of the master.

6. Under the Remote network section, enter the network Address and network Subnet mask. The Network Address and

Network Mask fields inform the Master node of the LAN address scheme of the slave.

7. Press the Generate button to create a secret key to be shared with the slave. When the timestamp appears, you can

click the Download button to save the file to exchange with the other router.

8. When you have saved the secret key file on each router, use the Browse button to locate the secret key file for the

master and then press the Upload button to send it to the slave. Perform the same for the other router, uploading the

slave’s secret key file to master.

9. When they are uploaded click the Save button to complete the peer-to-peer OpenVPN configuration.

www.netcommwireless.com

NetComm Wireless CDMA M2M Router