User's Manual

ITEM DEFINITION
System information
System up time The current uptime of the router.
Board version The hardware version of the router.
Router Serial Number The serial number of the router.
Software The software version number running on the router.
Model The type of phone module and the firmware version of the module.
Firmware The firmware revision of the phone module.
MDN The Mobile Directory Number of the router on the network.
LAN
IP The IP address and subnet mask of the router.
MAC Address The MAC address of the router.
Ethernet Port Status Displays the current status of the Ethernet port and its operating speed.
Cellular connection status
Activation Status Displays the activation status of the router on the carrier network.
Coverage Indicates the type of coverage being received by the router’s antennas.
Signal strength (dBm) The current signal strength measured in dBm
Roaming status The roaming status of the router.
SID / NID The System ID and Network ID of the router.
MIP IP Address The Mobile IP Address.
MEID The mobile equipment identifier (MEID) of the router, a unique code for identifying devices on a CDMA network.
Frequency The channel that the router is using on the mobile network.
Network registration status The status of the router’s registration for the current network.
Packet data connection status
Profile name The name of the active profile.
Status The connection status of the active profile.
IP Type
The type of IP in use. SIP is a Simple IP connection and when moving between cell sectors, the PPP session is
torn down. MIP is a Mobile IP connection which creates an address which is persistent between across cell sectors
allowing the mobile connection to remain connected even when moving between cell sectors.
WWAN IP The IP address assigned by the mobile broadband carrier network.
DNS server The primary and secondary DNS servers for the WWAN connection.
Connection uptime The length of time of the current mobile connection session.
Advanced status
Mobile Country Code The Mobile Country Code (MCC) of the router.
Mobile Network Code The Mobile Network Code (MNC) of the router.
Power input mode Displays whether power is currently being sourced from the PoE Ethernet port or from the DC input jack.
DC input voltage Displays the current voltage of the power input source provided via the DC Input jack
PN (1x) Index The pseudo-random number index used in encrypting the mobile connection for RTT connections.
PN (1x EVDO) Index The pseudo-random number index used in encrypting the mobile connection for EVDO connections.
Channel (1x) The 1x (RTT) channel number in use.
Channel (1x EVDO) The 1x (EVDO) channel number in use.
Cell ID A unique code that identifies the base station from within the location area of the current mobile network signal.
Signal quality (Ec/Io)
A measurement of the portion of the received signal that is usable. This is the signal strength minus the signal
noise level.
Received signal code power (RSCP) The power level of the signal on the current connection’s particular channel.
Table 10 - Status page item details
www.netcommwireless.com
NetComm Wireless CDMA M2M Router
21