User's Manual

Activating the router
The CDMA M2M Router requires activation on the network before it can be used. The router is not activated until you perform
the activation process.
To perform the activation process:
1. Log in to the router as described above. The Status page is displayed and the router prompts you to activate it by
displaying the following pop-up window:
2. Click the OK button on the pop-up window. The router displays “Programming In Progress”. Wait approximately 2
minutes for the activation process to complete.
Figure 16: Activation - Programming In Progress
3. When the activation process is complete, the router displays “Programming successful!”
Figure 17: Activation - Programming successful
Your router is now activated and ready for use. The CDMA M2M Router comes with preconfigured settings that should
suit most customers. For advanced configuration, see the following section.
www.netcommwireless.com
NetComm Wireless CDMA M2M Router
19