User's Manual

Perpendicular to the wall

If a large surface area is not available, there is the option of mounting the router perpendicular to the wall. This gives the router

a small wall footprint while remaining securely attached. Use appropriately sized screws in the mounting holes provided on the

back of the unit.

Figure 5 - Wall mount - Perpendicular to the wall

C Section DIN Rail mount

The CDMA M2M router easily slides onto a C Section DIN rail so that it is horizontally mounted. The DIN Rail mounting bracket

is not required for C Section DIN rail mounting.

Figure 6 - C Section DIN rail mount

To mount the unit on a C-Section DIN rail, slide it on as illustrated below:

Figure 7 - Mounting the unit on a DIN rail

NetComm Wireless CDMA M2M Router