User's Manual
www.netcommwireless.com
Vodafone MachineLink 3G
83
Required PASSWORD set APN=”3netaccecss”; set password=NetComm
Send SMS to reset to factory default
settings
Not required execute factorydefaults
Required PASSWORD execute factorydefaults
Send SMS to retrieve status of
router
Not required get status
Required PASSWORD get status
Send SMS to retrieve the history of
the session, including start time, end
time and total data usage
Not required get sessionhistory
Required PASSWORD get sessionhistory
Send SMS to configure the router to
send syslog to a remote syslog
server
Not required set syslogserver
Required PASSWORD set syslogserver
Send SMS to wake up the router,
turn on the default gateway and
trigger the ‘connect on demand’
profile if in waiting state.
Not required (zero SMS)
Required PASSWORD (zero SMS)
Send SMS to retrieve MCC, MNC,
network type, provider’s name and
operator status
Not required get plmnscan
Required PASSWORD get plmnscan
Send SMS to retrieve current
network type selection mode, MNC
and MCC values.
Not required get forceplmn
Required PASSWORD get forceplmn
Send SMS to force connection to a
specific operator and network type
Not required set forceplmn=505,1,7
Required PASSWORD set forceplmn=505,1,7
Send SMS to reboot the router
Not required execute reboot
Required PASSWORD execute reboot
Send SMS to perform firmware
upgrade when firmware is located
on HTTP server
Not required
execute download http://download.com:8080/firmware_image.cdi
execute download http://download.com:8080/firmware_image_r.cdi
Required
PASSWORD execute download
http://download.com:8080/firmware_image.cdi
PASSWORD execute download
http://download.com:8080/firmware_image_r.cdi
Send SMS to perform firmware
upgrade when firmware is located
on FTP server
Not required
execute download
ftp://username:password@download.com:8080/firmware_image.cdi
execute download ftp://username:password@
download.com:8080/firmware_image_r.cdi
Required
PASSWORD execute download ftp://username:password@
download.com:8080/firmware_image.cdi
PASSWORD execute download ftp://username:password@
download.com:8080/firmware_image_r.cdi
Send SMS to turn off PPPoE
Not required set pppoe=0
Required PASSWORD set pppoe=0
Send SMS to turn on PPPoE and
set APN and service name
Not required set pppoe=1,internet, Vodafone
Required PASSWORD set pppoe=1,internet, Vodafone
Send SMS to retrieve the PPPoE
status, currently configured APN and
service name
Not required get pppoe
Required PASSWORD get pppoe
Send SMS to set the default data
connection profile
Not required set defaultprofile=1
Required PASSWORD set defaultprofile=1
Send SMS to retrieve the currently
configured default data connection
profile
Not required get defaultprofile
Required PASSWORD get defaultprofile
Send SMS to set the LED mode
timeout to 10 minutes
Not required set ledmode=10
Required PASSWORD set ledmode=10
Send SMS to retrieve the current
LED mode
Not required get ledmode
Required PASSWORD get ledmode
Table 22 - SMS diagnostics example commands