User's Manual
YML6908 NTC-6000 Series User Guide
www.netcommwireless.com
55
List of Valid Variables:
Where “x” is a profile number (1-6). If no profile is specified, variables are read for or written to for the current active profile. If a profile is specified, the variable is read for or written to for the
specified profile number (‘x’).
# RDB VARIABLE NAME
SMS VARIABLE
NAME
READ/WRITE DESCRIPTION EXAMPLE
0
link.profile.x.enable
link.profile.x.apn
link.profile.x.user
link.profile.x.pass
link.profile.x.auth_type
link.profile.x.iplocal
link.profile.x.status
profile
or
profilex
RW
Profile
Read:
(profile no,apn,user,pass,auth,iplocal,status)
1,Telstra.internet,username,password, chap,202.44.185.111,up
Write:
(apn, user, pass,auth)
Telstra.internet,username,password
1 link.profile.x.apn apn or apnx RW APN telstra.internet
2 link.profile.x.user username or usernamex RW 3G username Guest, could also return “null”
3 link.profile.x.pass
password or password RW 3G password Guest, could also return “null”
4 link.profile.x.auth_type
authtype or authtypex RW 3G Authentication type ”pap” or”chap”
5 link.profile.x.iplocal wanip or wanipx R WAN IP address 202.44.185.111
6
wwan.0.radio.information.signal_str
ength
rssi R 3G signal strength 65 dBm
7 wwan.0.imei imei R IMEI number 359102128941027512
8 statistics.usage_current
usage R
3G data usage of current
session
“Rx 500 bytes, Tx 1024 bytes, Total 1524 bytes” or “Rx 0
byte, Tx 0 byte, Total 0 byte” when wwan down
9 statistics.usage_current
wanuptime R Up time of current 3G session 1 days 02:30:12 or 0 days 00:00:00 when wwan down
10 /proc/uptime deviceuptime R Device up time 1 days 02:30:12
11
wwan.0.system_network_status.cur
rent_band
band R Current 3G frequency WCDMA 850
Table13:SMS‐ValidVariables