User's Manual
NTC-6000 Series – Industrial M2M Wireless Routers YML6908
34
www.netcommwireless.com
NETCOMM CALLDIRECT™ SERIES – NTC-6000 Series
ITEM DEFINITION
Profile Type Set this option to IPSec.
Enable VPN Enable or Disable the VPN connection.
Profile Name A name that can be used to identify the VPN connection.
Remote IPSec Gateway The IP address that the IPSec server is running on.
Road Warrior
Click this to configure the VPN connection for Road Warrior (connection from a dynamic IP Address) use.
Remote Address/Net to Join Enter the Remote IP address or Network for use on the VPN connection.
Remote Address/Net Mask Enter the subnet mask in use on the remote network.
Local Address/Net to Join Enter the Local IP address or Network for use on the VPN connection.
Local Address/Net Mask Enter the subnet mask in use on the local network.
Encap Protocol Select the encapsulation protocol to use with the VPN connection.
IKE Mode Select the IKE mode to use with the VPN connection.
PFS
Select whether or not to use PFS (Perfect Forward Secrecy) for the VPN connection. This feature will make sure
the same key is not generated twice and forces a new diffie-hellman key exchange. Both VPN endpoints must
support this function in order for it to work.
IKE Encryption Select the IKE (IPSec Key Exchange) encryption type to use with the VPN connection.
IKE Hash Select the IKE Hash type to use for the VPN connection.
IPSec Encryption Select the IPSec encryption type to use with the VPN connection.
IPSec Hash Select the IKE Hash type to use for the VPN connection.
DH Group Select the Diffie-Hellman group the VPN tunnel will use.
DPD Action
Select the appropriate DPD (Dead Peer Detection) Action to use when the VPN tunnel detects a peer dropping
the VPN tunnel connection.
DPD Keep Alive Time Enter the time in seconds for DPD to keep alive.
DPD Timeout Enter the time in seconds for DPD to timeout.
IKE Rekey Time Enter the appropriate IKE Rekey time for the VPN connection.
SA Life Time
Enter the appropriate SA (Security Association) Life time for the VPN connection.
Key Mode
Select the type of key mode in use for the VPN connection. You can select from: Pre Shared Key, RSA Keys or
Certificates
Table9:InternetSettings‐VPN–IPSecDetails