User's Manual


NTC-6000 Series – Industrial M2M Wireless Routers YML6908
24
www.netcommwireless.com
NETCOMM CALLDIRECT™ SERIES – NTC-6000 Series
Establishing a Connection to a Cellular Network
This section describes how to configure the router to initiate a Mobile Broadband connection. There are 2 possible methods that can be used to set up a Mobile Broadband connection via PPP:
Initiating the PPP Connection directly from the router (most common).
Initiating the PPP Connection from a different PPP client (i.e. laptop or router) with the router running in transparent PPPoE mode.
Initiating a PPP Connection Directly from the Router
The status page of the router should be displayed as below. Please ensure that the SIM Status is ‘SIM OK’ before you initiate a Mobile Broadband connection.
Figure32:StatusPage‐SimOk
Click on click on the “Internet Settings” menu and select “Mobile Broadband” followed by the “Connection” option on the right as shown in Figure 33 below.
Figure33:MobileBroadband‐ConnectionOption
