User's Manual
86
NetComm Wireless Intelligent M2M Route
r
www.netcommwireless.com
Send SMS to check the MEID number
Not required get meid
Required PASSWORD get meid
Send SMS to check the current band
Not required get band
Required PASSWORD get band
Send SMS to Disconnect (if connected) and
reconnect the data connection
Not required execute pdpcycle
Required PASSWORD execute pdpcycle
Send SMS to disconnect the data connection
Not required execute pdpdown
Required PASSWORD execute pdpdown
Send SMS to connect the data connection
Not required execute pdpup
Required PASSWORD execute pdpup
Send multiple get command
Not required get wanip; get rssi
Required PASSWORD get wanip; get rssi
Send multiple set command
Not required set ssh.genkeys=1; set username=test; set auth=pap
Required PASSWORD set ssh.genkeys=1; set username=test; set auth=pap
Send SMS to reset to factory default settings
Not required execute factorydefaults
Required PASSWORD execute factorydefaults
Send SMS to retrieve status of router
Not required get status
Required PASSWORD get status
Send SMS to retrieve the history of the session,
including start time, end time and total data usage
Not required get sessionhistory
Required PASSWORD get sessionhistory
Send SMS to configure the router to send syslog to a
remote syslog server
Not required set syslogserver
Required PASSWORD set syslogserver
Send SMS to wake up the router, turn on the default
gateway and trigger the ‘connect on demand’ profile
if in waiting state.
Not required execute wakeup
Required PASSWORD execute wakeup
Send SMS to perform firmware upgrade when
firmware is located on HTTP server
Not required
execute download http://download.com:8080/firmware_image.cdi
execute download http://download.com:8080/firmware_image_r.cdi
Required
PASSWORD execute download http://download.com:8080/firmware_image.cdi
PASSWORD execute download http://download.com:8080/firmware_image_r.cdi
Send SMS to perform firmware upgrade when
firmware is located on FTP server
Not required
execute download ftp://username:password@download.com/firmware_image.cdi
execute download ftp://username:password@ download.com/firmware_image_r.cdi
Required
PASSWORD execute download ftp://username:password@ download.com/firmware_image.cdi
PASSWORD execute download ftp://username:password@ download.com/firmware_image_r.cdi
Send SMS to turn off PPPoE
Not required set pppoe=0
Required PASSWORD set pppoe=0
Send SMS to turn on PPPoE and set dialstring and
service name
Not required set pppoe=1,atd#777, Test
Required PASSWORD set pppoe=1,atd#777, Test
Send SMS to retrieve the PPPoE status, currently
configured dial string and service name
Not required get pppoe
Required PASSWORD get pppoe
Send SMS to set the LED mode timeout to 10 minutes
Not required set ledmode=10
Required PASSWORD set ledmode=10
Send SMS to retrieve the current LED mode
Not required get ledmode
Required PASSWORD get ledmode
Retrieve current SSH protocol
Not required get ssh.proto
Required PASSWORD get ssh.proto