User's Manual



74
NetComm Wireless Intelligent M2M Route
r
www.netcommwireless.com
SMS messaging
The Intelligent M2M Router offers an advanced SMS feature set, including sending messages, receiving messages, redirecting incoming messages to another destination, as well as supporting
remote commands and diagnostics messages.
Some of the functions supported include:
Ability to send a text message via a CDMA network and store it in permanent storage.
Ability to receive a text message via a CDMA network and store it in permanent storage.
Ability to forward incoming text messages via a CDMA network to another remote destination which may be a TCP/UDP server or other mobile devices.
Ability to receive run-time variables from the device (e.g. uptime) on request via SMS
Ability to change live configuration on the device (e.g. network username) via SMS.
Ability to execute supported commands (e.g. reboot) via SMS
Ability to trigger the Intelligent M2M Router to download and install a firmware upgrade
Ability to trigger the Intelligent M2M Router to download and apply a configuration file
To access the SMS messaging functions of the Intelligent M2M Router, click on the Services menu item from the top menu bar, and then select one of the options under the SMS messaging
section on the left hand menu.
Setup
The Setup page provides the options to enable or disable the SMS messaging functionality and SMS forwarding functionalities of the router. SMS messaging is enabled by default.
Figure 79 - General SMS Configuration