User's Manual

66
NetComm Wireless Intelligent M2M Route
r
www.netcommwireless.com
Data stream manager
The data stream manager provides you with the ability to create mappings between input ports and output ports (e.g. Serial Port, SMS, GPS, USB) and performs any required translation or data
processing by each virtual data tunnel. Customers interested in developing their own applications to create custom mappings can contact NetComm Wireless about our Software Development
Kit.
To add a new data stream:
1.
Click the +Add button on the right side of the page.
Figure 72 - Data stream list
2.
Click the Activate toggle key so that it is in the ON position.
Figure 73 - Activate button
3.
In the Data stream name field, enter a name to identify the mapping on the Data stream list.
4.
Under the Endpoint A section, use the Type drop down list to select the input port. In the Mode drop down list, select the mode of the input port. If Endpoint A is set to Serial, use
the displayed drop down lists to specify further parameters about the serial port settings and PAD settings if required.
5.
Under the Endpoint B section, use the Type drop down list to select the output port. Use the Mode drop down list to select the mode of the output port. Enter any other details as
required for the type of output you have selected.
6.
Click the Save button to confirm your settings.