User's Manual
YML40V
www.netcomm-commercial.com.au
NTC-40WV –HSPA+ M2M WiFi Router with Voice
5
HSPA+ M2M WiFi Router with Voice NETCOMM WIRELESS M2M SERIES – NTC-40WV
Overview
Introduction
This document provides you all the information you need to set up, configure and use the NTC-40WV router. .
Target Users
This document is intended for system integrators or experienced hardware installers who understand telecommunications terminology and concepts.
Prerequisites
Before continuing with the installation of your NTC-40WV, please confirm that you comply with the minimum system requirements below.
An activated 3G SIM card.
Device with a working Ethernet or wireless (802.11b/g/n) network adapter.
A Web Browser such as Internet Explorer, Netscape Navigator, Mozilla Firefox, Opera, Safari etc.
Telephony Requirements
Standard analogue PSTN or cordless PSTN phone handset (DECT) with an RJ-11 port.
(ISDN phone handsets are not supported)
RJ-11 cable
Notation
The following symbols are utilised in this installation manual:
-
The following note requires attention
-
The following note provides a warning
-
The following note provides relevant information