User's Manual

44
NTC-40WV –HSPA+ M2M WiFi Router with Voice
YML40V
www.netcommwireless .com
HSPA+ M2M WiFi Router with Voice NETCOMM WIRELESS M2M SERIES – NTC-40WV
Wireless Security Settings
You may choose from the following wireless security options:

Open

Shared

WPA

WPA-PSK

WPA2

WPA2- PSK

WPA-PSK-WPA2-PSK

WPA1-WPA2

802.1x.
WPA1/WPA2
WPA (WiFi Protected Access) authentication is suitable for enterprise applications. It must be used in conjunction with an authentication server such as RADIUS to provide centralized access
control and management. It provides a stronger encryption and authentication solution.
Figure 35 - Advanced View – WiFi Security Settings - WPA1/WPA2
WPA-PSK/WPA2-PSK
A newer type of security is WPA-PSK (TKIP) and WPA2-PSK (AES). This type of security gives a more secure network compare to WEP. Use TKIP Encryption Type for WPA-PSK and AES for
WPA2-PSK. After that, please enter the key in the Passphrase field. The key needs to be more than 8 characters and less than 63 characters and it can be any combination of letters and
numbers.
Please note that the configuration for WPA2, WPA-PSK-WPA2-PSK, WPA-PSK and WPA2-PSK is identical.
Figure 36 - Advanced View – WiFi Security Settings - WPA-PSK/WPA2-PSK
Please note: Your NTC-40WV uses WPA2-PSK by default. Check your Wireless Security Card or the device label on the bottom of the NTC-40WV for your default SSID and Security
key to begin connecting your wireless devices.