User's Manual

YML40V
www.netcomm-commercial.com.au
NTC-40WV –HSPA+ M2M WiFi Router with Voice
31
HSPA+ M2M WiFi Router with Voice NETCOMM WIRELESS M2M SERIES – NTC-40WV
RIP
RIP (Routing Information Protocol) is used for advertising routes to other routers. Thus all the routes in the router’s routing table will be advertised to other nearby routers. For example, the route
for the router’s Ethernet subnet could be advertised to a Router on the PPP interface side so that a Router on this network will know how to route to a device on the router’s Ethernet subnet. You
will have to add the routes appropriately in the Static Routes section – see Adding Static Routes.
Please note: Some routers will ignore RIP.
Figure 25 - RIP Settings

Click Enable for the “RIP Enable” option.

Select the RIP version.

Click the “Save RIP” button.