User's Manual

30
NTC-40WV –HSPA+ M2M WiFi Router with Voice
YML40V
www.netcommwireless .com
HSPA+ M2M WiFi Router with Voice NETCOMM WIRELESS M2M SERIES – NTC-40WV
Routing
Static
The Static Route page is used to add or delete static routes. Static routes can be used to facilitate communication between devices on different networks.
Figure 24 - Static Route Settings
Some routes are added by default by the router on initialisation such as the Ethernet subnet route for routing to a device on the Ethernet subnet. A PPP route is also added upon obtaining a WAN
PPP connection.
Adding Static Routes
 Enter the required values in the fields (as shown above) for route being added.
 Click the “ADD” button.
Please note: You must increment the “Route no” by 1 for each route in the “Route no” field otherwise that route will be overwritten.
The Active Routing table at the bottom will then show the new route added.
Deleting Static Routes
Click the “Delete Entry” text (in blue).