User's Manual

YML40V
www.netcomm-commercial.com.au
NTC-40WV –HSPA+ M2M WiFi Router with Voice
25
HSPA+ M2M WiFi Router with Voice NETCOMM WIRELESS M2M SERIES – NTC-40WV
SIM Security
The SIM Security page can be used for authenticating SIM cards that have been configured with a security PIN code. The security PIN code protection can also be enabled or disabled on this
page.
Figure 16 - Internet Settings - Mobile Broadband - SIM Security
If the SIM card is locked you will need to unlock it with a PIN provided with your SIM card. You can find out if the SIM is locked by viewing the SIM Status on the Status page:
Figure 17 - SIM Security - Status Page Warning
If the SIM Status is “SIM PIN” as above then do the following:
a) Click on the “Internet Settings” menu at the top of the page and then the “SIM Security” item from the WWAN (3G) menu item on the right.
Figure 18 - SIM Security - SIM PIN Needed
b) Enter the PIN code in the “PIN” field and then enter it again in the “Confirm PIN” field to confirm the PIN code.
Please note: You can also select to “
Remember PIN
” so that entering the PIN code each time the SIM is inserted is not required. Alternatively you can also disable SIM PIN protection
by selecting to “
Disable PIN
” from the “PIN Protection” drop down menu.
c) Click Save.
Enter PUK
After three incorrect attempts at entering the PIN code, you are requested to enter a PUK code.
Please note: You will need to contact your 3G provider to obtain this number.
Your carrier will issue you a PUK code to enable you to unlock the SIM and enter a new PIN code. Enter the new PIN and PUK codes and click Save.