User's Manual

YML40V
www.netcomm-commercial.com.au
NTC-40WV –HSPA+ M2M WiFi Router with Voice
11
HSPA+ M2M WiFi Router with Voice NETCOMM WIRELESS M2M SERIES – NTC-40WV
6
WiFi Antenna Port
Connect one of the WiFi antennas here.
Table 5 - Top Mounted Integrated Interfaces
NTC-40WV Default Settings
The following tables list the default settings for the NTC-40WV.
LAN (MANAGEMENT)
Static IP Address:
192.168.1.1
Subnet Mask:
255.255.255.0
Default Gateway:
192.168.1.1
Table 6 - LAN Management Default Settings
WIRELESS (WIFI)
SSID:
NetComm Wireless XXXX where XXXX are a set of 4
random digits.
Security:
WPA2-PSK
Security Key:
Check your Wireless Security Card or the device label
on the bottom of the NTC-40WV for your default SSID
and Security key.
Table 7 – WiFi Default Settings
For security purposes, it is recommended to change the Default SSID and Wireless Security Key.
NTC-40WV WEB INTERFACE ACCESS
Username:
admin /root
Password:
admin
Table 8 - Web Interface Default Settings
NTC-40WV TELNET ACCESS
Username:
root
Password:
bovine
Table 9 - Telnet Access
Logging into the router with the username of root gives extended System options such as the ability to reboot the router, upgrade the firmware and install
extra packages.