User's Manual
NTC 3000 Series – M2M Serial Modem
48
www.netcommwireless.com
Technical Data
The following table lists the hardware specifications of the NTC-3000 Series devices.
MODEL NETCOMM NTC-3000 SERIES
Modem Chipset/Module
Sierra Wireless AirPrime SL8080T (NTC-3000-01)
Sierra Wireless AirPrime SL8082T (NTC-3000-02)
Sierra Wireless AirPrime SL8084T (NTC-3000-03)
UMTS bands
UMTS 850/1900 (NTC-3000-01)
UMTS 900/2100 (NTC-3000-02)
UMTS 850/2100 (NTC-3000-03)
GSM bands Quad-band EDGE/GPRS/GSM 850/900/1800/1900MHz
Maximum Data Throughput / 3G Radio
interface
Peak download rate: 3.6 Mbps
Peak upload rate: 384 Kbps
Maximum Data Throughput / Serial RS232
interface
Auto baud rate - 115,200 / 57,600 / 38,400 / 19,200 / 9,600 /4,800 / 2,400 bps
Connectivity
1x RJ-45 port (incl. DB9 adapter) for serial RS-232 connections
1x Mini USB console port (Windows driver available)
SIM Card Reader Lockable tray, supports standard USIM/SIM
Antenna connector 1x SMA
LED Indicators Power, 3G Status
Operating Temperature Normal: -40 ~ 85 °C
Power input 5 ~ 36 V DC via RJ-45 port
Dimensions & Weight 74 x 57 x 24 mm / 84g (w/o mounting bracket and antenna)
Regulatory Compliancy
A-Tick, CE (NTC-3000-02)
A-Tick, CE (NTC-3000-03)
Table6‐TechnicalSpecificationsfortheNTC‐3000Series
Mini USB Connector
The mini USB connector provides a USB based virtual COM port to facilitate communications to the NTC-3000 series in the event that a COM port fails. This is achieved through the
use of an SWI driver and an accompanying “3G Watcher” application. The connector uses a standard mini USB pin out configuration.
Pin: 1 5
Figure38‐TheMiniUSBConnector
PIN SIGNAL
1 VIN
2 D-
3 D+
4 N/C
5 GND
Table7‐MiniUSBConnectorPinOuts