User's Manual

NTC-3000 Series

www.netcommwireless.com

NTC 3000 Series –

M2M

Serial Modem

AT+FACTORY_RESET

Description: Resets the NTC-3000 to factory default settings, effectively performing the following commands:

AT + PAD = 0

AT + APN =

AT + USER_PASS = "",""

AT + FORCE_RESET = 0

AT + SERVER = ,1516

AT + SMS_DIAGNOSTICS= 0

AT + SMS_ACK = 0

AT + SMS_PASSWORD = 1234

AT + EOL = 0x0D,0x0A

AT + SERIAL_BAUD = 115200

AT + SERIAL_FORMAT = 3

AT + SERIAL_PARITY = 4

AT + SERIAL_FLOW = 0

AT + CHAR_TIMEOUT = 8 seconds

AT + TCP_TIMEOUT = 10

AT + TCP_RETRY = 0 (Infinite)

AT + DYN_ENABLE = 0

AT + DYN_HOST =

AT + DYN_USER =

AT + DYN_PASS =

Usage: AT+FACTORY_RESET=1

Help: AT+FACTORY_RESET=?

AT+SERIAL_ON_START

Description: This command configures whether the serial port initialises on power up or initialises when there are active connections.

Usage: AT+SERIAL_ON_START=x

where ‘x’ is an option number

Usage 2: AT+SERIAL_ON_START?

Help: AT+SERIAL_ON_START=?

Options: 1 serial port is initialised on power up

0 serial port is initialised when there are active connections