User's Manual

NTC-3000 Series
www.netcommwireless.com
NTC 3000 Series – M2M Serial Modem
31
AT+APN
Description: Sets the Access Point Name (APN) used to connect to the broadband network. The default setting is blank.
Usage 1: To set the APN
AT+APN=xxxx
where ‘xxxx’ is the APN that you wish to use.
Usage 2: To retrieve the currently configured APN
AT+APN?
Example: To set the APN to ‘testAPN’ enter
AT+APN=testAPN
AT+USER_PASS
Description: Sets the username and password used to connect to the broadband network.
Usage 1: To set the username and password
AT+USER_PASS=”xxxx”,”xxxx”
Usage 2: To retrieve the currently configured username and password
AT+USER_PASS?
Help: AT+USER_PASS=?
Options: username the user name for the broadband account
password the password for the broadband account
Example: To configure the username as ‘user1’ and password as ‘testpass’ enter
AT+USER_PASS=”user1”,”testpass”
AT+SERIAL_BAUD
Description: Sets the baud rate used for communication between the modem and the connected device.
Usage 1: To set the baud rate
AT+SERIAL_BAUD=[baud]
Usage 2: To retrieve the currently configured baud rate
AT+SERIAL_BAUD?
Help: AT+SERIAL_BAUD=?
Options: 300, 600, 1200. 2400. 4800, 9600, 19200, 38400, 57600, 115200 (default value), 230400, 460800, 921600.
Example: To configure the baud rate to 115200bps enter
AT+SERIAL_BAUD=115200