User's Manual

NTC-3000 Series
www.netcommwireless.com
NTC 3000 Series – M2M Serial Modem
29
Using a terminal emulator such as HyperTerminal and the AT command Reference Guide, the NTC-3000 Series router can be configured to perform customised operations. Please
refer to the Supported AT Command Reference Guide available on the NetComm Wireless website at http://www.sierrawireless.com for more information on the functions available.
If you are unable to type at, check that you have selected the correct COM port for the NTC-3000. Alternatively, try to open a connection using a physical COM port with a DB9
serial/power adapter cable attached.
Open AT Application Framework
The NetComm Wireless NTC-3000 Series Routers support the Open AT Application Framework. The Open AT application framework consists of an M2M specific operating system,
libraries and development studio allowing the accelerated creation of embedded M2M applications and sharing of processing resources.
To begin developing M2M applications, download the Open AT Application Framework on the Sierra Wireless developer website at
http://developer.sierrawireless.com/OpenAT/download