User's Manual
Table Of Contents
- Introduction
- Target audience
- Prerequisites
- Notation
- Product overview
- Product features
- Package contents
- Physical dimensions
- LED indicators
- Ethernet port LED indicators
- Interfaces
- Mounting options
- DIN rail mounting bracket
- Wall mounted via DIN rail bracket
- DIN rail mount
- Pole mount using DIN rail bracket
- Desk mount
- Powering the router
- Installing the router
- Data Connection
- Connect on demand
- SIM Management
- Operator settings
- SIM security settings
- LAN
- Wireless settings
- Ethernet LAN/WAN
- WAN failover
- Routing
- VPN
- Dynamic DNS
- Network time (NTP)
- Data stream manager
- PADD
- SNMP
- TR-069
- GPS
- USSD
- IO configuration
- SMS messaging
- Diagnostics
- Sending an SMS Diagnostic Command
- Log
- System configuration
- Administration
- Watchdogs
- Power management
- USB-OTG
- Storage
- Reboot
- Restoring factory default settings
- Accessing recovery mode
- Status
- Log
- Application Installer
- Settings
- Reboot
- Overview
- Accessing USB/SD card storage devices
- Host and Device mode
38
NetComm Wireless 4G WiFi M2M Router
www.netcommwireless.com
UM-00009
Figure 44 - Wireless Settings – SSID and Security Settings
OPTION
DEFINITION
SSID
The SSID (Service Set Identifier) or Network Name in use for the wireless network.
Activate this SSID
Enables or disables the network selected in the SSID drop down list.
Broadcast SSID
Toggles whether the router broadcasts the SSID or whether it is hidden from wireless network scans.
Network Authentication
The wireless security settings. See below for in depth analysis.
WPA pre-shared key
The wireless security key or wireless password.
WPA group rekey interval
The time in seconds before a new key is generated.
WPA encryption
The type of WPA encryption. Options include AES, TKIP or TKIP + AES.
Table 14 - Wireless Settings – SSID and Security Settings