User's Manual
| AIMWLLR0-35
13
Antenna Alignment Tool
5. Wait approximately 1 minute for the antenna to go through its boot
up process.
6. Using a portable wireless device such as a laptop or tablet, scan for
nearby wireless networks. Connect to the network being broadcast by
the Antenna Alignment Tool using the Network Name and Password
which are printed on the label and on the WiFi security card included
in the package. When the wireless connection has been established,
use your wireless device to browse to the IP address of the antenna.
To complete the installation, follow the Installation Guide that comes
with your outdoor antenna.
NOTE: When the Antenna Alignment Tool is connected to the Outdoor Antenna, do not point
the front panel of the antenna directly at other people or yourself. Always maintain a separation
distance of 8 inches between any part of your body and the front of the antenna (the ofcial
FCC recommendation species 20cm separation). We recommend that you disconnect the
PoE cable and Antenna Alignment Tool if you are working in proximity to the antenna and it is
not required to be on.
QSG-00097 rev 7 AIMWLLR0-35 [NRB-0200] QSG.indd 13 21/12/2016 2:02 PM