User's Manual

54 2400164
NHD1W User Guide
Administration
The Administration page is used to enable or disable remote administration and set
the username / password required to access the NHD1W remotely.
Figure 35: Administration Configuration Items
Option
Definition
Remote Administration
Enable or disable remote HTTP access to
the NHD1W.
Remote Administration Port
Set the port to use for remote HTTP access.
Admin Password
Enter the new password for the selected
user account.
Confirm Password
Re-enter the new password for the selected
user account.
Note: It is not necessary to change the password if you are only changing the incoming port
number.
To access the NHD1W’s configuration pages remotely:
1. Open a browser window (for example Internet Explorer, Firefox, Safari).
2. In the address bar, enter the NHD1W’s WAN IP address and assigned port
number, for example “10.10.10.10: 8080”.
Note: You can find the NHD1W’s WAN IP address by clicking the “Status” menu. The Local
field in the WWAN section shows the NHD1W’s WAN IP address.
3. Click Login and type “admin” in the Username and “admin” in the Password
fields (without quotes). Then click on Submit.