User's Manual

Advanced Settings
Rev 1 Feb. 2012 53
Update Firmware
This page allows you to upgrade the NHD1W’s internal software (firmware).
The upgrade process takes approximately 4 minutes. During the firmware upgrade
process, all the lights on the front of the NHD1W will flash.
Figure 34: Advanced View - Firmware Update
Warning: Do NOT turn off the NHD1W during the firmware upgrade process. It is
recommended to use Ethernet LAN interface for firmware upgrades.
To upgrade the firmware of your NHD1W:
1. Download the upgrade image file from the NetComm Wireless support site
www.netcomm.com.au.
2. Click the Browse button and navigate to the location of the firmware file that
you've downloaded.
3. Click Apply to start the upgrade process.
4. Follow the on-screen prompts.
Once completed, your NHD1W will reboot to the Easy mode operation.