User's Manual

52 2400164
NHD1W User Guide
Settings
The settings page is used to back up or restore the NHD1W’s configuration or to
reset it to factory defaults.
Figure 33: Load / Save Configuration Page
Note: To perform an update, you must be logged into the NHD1W as the root user (see the
Administration section on page 54 for more details).
To save a copy of the NHD1Ws configuration:
1. Enter the root manager Password and click Save.
This will download a copy of the NHD1W’s current settings to your PC.
Note: Do NOT edit the contents of the file downloaded file; if you modify it, you might not be
able to use it to restore the NHD1W’s configuration later.
You can change the name of the file but the filename extension must remain “.cfg”.
To restore the NHD1W’s configuration using downloaded file:
1. Click Browse.
2. Select the configuration file you wish to restore.
3. Click Restore under Restore saved settings.
To restore the NHD1W’s configuration to the factory defaults:
1. Click Restore under RESTORE FACTORY DEFAULTS.
The NHD1W will then restart.