User's Manual

Get Started
Rev 1 Feb. 2012 19
Hardware Installation
1. Attach the supplied antennas to the ports marked “3G/4G ANTENNA”. [Attach in
a clockwise direction, as shown by the red arrow in the photo below.]
2. Turn the metal part to screw in the antenna until it tightens, then hold the metal
part while turning the antenna to a vertical position.
3. Connect the power adapter to the POWER socket on the back of the NHD1W.
Plug the power adapter into the wall socket. The WLAN and WWAN LEDs blink
for approximately 30 seconds while the NHD1W boots up.
4. Follow the instructions provided with your AirCard mobile hotspot to connect to
the Internet. Then dock the AirCard mobile hotspot into the NHD1W.
You are ready to use the NHD1W!
Note: Without the AirCard mobile hotspot, the NHD1W is not functional out of the box.