User's Guide

47 of 63
CFW-2182 – User Guide
UG01233 v1.2 August 13, 2020 © Casa Systems 2020
2 In the ACS URL field, enter the Auto Configuration Server’s full domain name or IP address.
3 Use the ACS username field to specify the username used by the server to authenticate the CPE
when it sends an “inform” message.
4 In the ACS password and Verify ACS password fields, enter the password used by the server to
authenticate the CPE when it sends an “inform” message.
5 In the Connection request username field, enter the username that the CPE uses to authenticate the
Auto Configuration Server during a connection request to the CPE.
6 In the Connection request password and Verify password fields, enter the password that the CPE
uses to authenticate the Auto Configuration Server during a connection request to the CPE.
7 The inform message acts as a beacon to inform the ACS of the existence of the antenna. Click the
Enable periodic ACS informs toggle key to turn on the periodic ACS inform messages.
8 In the Inform Period field, enter the number of seconds between the inform messages.
9 Click the Save button to save the settings.