User's Guide

46 of 64
CBRS Survey UE – User Guide
UG01287 v0.6 December 1, 2020
Network time (NTP)
The NTP (Network Time Protocol) settings page allows you to configure the CFW-2172 antenna to synchronize its
internal clock with a global Internet Time server and specify the time zone for the location of the antenna. This
provides an accurate timekeeping function for features such as System Log entries and Firewall settings where the
current system time is displayed and recorded. Any NTP server available publicly on the internet may be used. The
default NTP server is 0.netcomm.pool.ntp.org.
To access the Network time (NTP) page, click on the Services menu at the top of the screen then click on the
Network time (NTP) menu item on the left.
Figure 39 - NTP settings
Timezone settings
To configure time zone settings:
1 The Current time field shows the time and date configured on the antenna.
a If this is not accurate, use the Time zone drop-down list to select the correct time zone for the
antenna.
b If the selected zone observes daylight savings time, a Daylight savings time schedule link appears
below the drop-down list. Click the link to see the start and end times for daylight savings.
2 When you have selected the correct time zone, click the Save button to save the settings.
NTP settings
To configure NTP settings:
1 Click the Network time (NTP) toggle key to switch it to the ON position.