User's Guide

43 of 64
CBRS Survey UE – User Guide
UG01287 v0.6 December 1, 2020
Figure 37 - SIM security - SIM PUK locked
Note – To obtain the PUK unlock code, you must contact your service provider.
You will be issued a PUK to enable you to unlock the SIM and enter a new PIN. Enter the new PIN and PUK codes.
Click the Save button when you have finished entering the new PIN and PUK codes.
LAN
LAN configuration
The LAN configuration page is used to configure the LAN settings of the antenna and to enable or disable DNS
Masquerading. To access the LAN configuration page, click on the Networking menu at the top of the screen,
then click on the LAN menu on the left.
Figure 38 – LAN configuration settings
The default IP of the LAN port is 192.168.1.1 with subnet mask 255.255.255.0.
To change the IP address or Subnet mask, enter the new IP Address and/or Subnet mask and click the Save
button.
Note – If you change the IP address, remember to reboot the antenna and enter the new IP address into your browser address bar.