User's Guide
Table Of Contents
21 of 64
CBRS Survey UE – User Guide
UG01287 v0.6 December 1, 2020
4 Place the Ethernet cable through the nut first, as shown below.
Figure 11 - Nut placed over Ethernet cable
5 Place the ferrule over the Ethernet cable as shown, making sure that the “teeth” are facing the nut.
Figure 12 - Ferrule placed over Ethernet cable
6 Place the rubber seal over the Ethernet cable with the wide end toward the RJ45 plug. See the image below
for the correct orientation.
Figure 13 - Rubber seal placed over Ethernet cable