User's Guide

16 of 63
CFW-2132 – User Guide
UG01228 v1.0 April 27, 2020 © Casa Systems 2020
Power the CFW
Power over Ethernet (PoE) is a method of connecting network devices through Ethernet cable where power
and data are passed along a single cable. It is therefore a convenient method of powering the CFW.
Note – The CFW Power supply is packaged and supplied separately.
R45 cable weather seal assembly
The CFW-2132 Antenna Power supply weather seal must be properly attached to prevent dust and water from
entering the CFW-2132 Antenna’s housing.
To connect Ethernet cable via the Power supply weather seal:
1 Unscrew the weather cap and remove the rubber gasket.
2 Separate the rubber seal and the ferrule.
Figure 13 - Rubber seal and ferrule
3 Twist the neck for the seal counter-clockwise to remove it from the CFW-2132. You should now have 5
pieces of the weather seal.
Figure 14 - Weather seal in five parts
4 Place the Ethernet cable through the nut first, as shown below.