User Manual


36
NetComm Wireless 4GM3W User Guidewww.netcommwireless.com
Security Settings
The Security Settings pages allow you to configure the security management on the router such as Packet filters and MAC
Control.
Status
The Status page lists any currently configured filtering for the Outbound, Inbound and Domain filters.
Packet Filters
The Packet Filter enables you to control what packets are allowed to pass through the router. There are two types of packet
filter, Outbound Packet Filter which applies to all outbound packets and the Inbound Packet Filter which only applies to
packets that are destined for a Virtual Server or DMZ host only.
Note: For further instructions on setting up MAC Level Filtering, please refer to the “MAC Control” section below
Outbound Filter:
To enable an Outbound Filter, tick the Enable tick box at the top of the page.