Operation Manual

12
NetBotz USB Coordinator & Router Installation Guide
After the boot process is complete, LED activity on the USB Coordinator &
Router signifies the following:
Coordinator LED activity
Router LED activity
To limit traffic on the network, the Router will attempt to rejoin the network
after waiting the following number of seconds: 5, 15, 30, 60, 120, 300.
If the attempts to rejoin the network fail, the Router will scan the network every
300 seconds + a random number of seconds. This additional random time
prevents multiple Routers from attempting to connect at the same time.
LED Activity Meaning
Flashing green Normal status
The network was formed successfully.
Off Forming a network
Solid green Joined another network as a Router.
Solid red Unable to form a network due to wireless
energy interference.
Relocate the Coordinator.
LED Activity Meaning
Solid green Normal Status - network present
Solid yellow Searching for network
Off The pod was previously configured as a
Coordinator.
Reset the sensor pod to factory defaults.