Installation Instructions

NetBotz Wireless Sensor Pod 180 Installation Guide
19
End Device LED activity
To conserve battery power, the End Device will attempt to join the network
after waiting the following number of seconds: 5, 15, 30, 60, 120, 300, 300,
600, 1200.
If the attempts to join the network fail, the End Device will scan the network
every six hours to re-try the connection. If an End Device cannot join the
network after approximately 24 hours, it will reboot and attempt to join the
network again.
To force an attempt to join the network, press the reset button.
LED Behavior Meaning
Flashes yellow twice every 2 seconds Searching for network
Turns solid green, then turns off Joined the network
Off Joined the network, or has not joined the
network and is conserving battery
power.