Installation Instructions

4
NetBotz Wireless Sensor Pod 180 Installation Guide
The following wireless sensors can be configured as the Coordinator or a
Router on the wireless network in Advanced View v4.4:
The following wireless sensors can be configured as End Devices on the
wireless network in Advanced View v4.4:
For more information about installing and configuring the NetBotz Wireless
USB Coordinator & Router or the NetBotz Wireless Temperature Sensor, see
the Installation Guide that came with the device.
Once you have added all the Wireless Sensor Pod 180s to your wireless
network, you can check their current firmware revision in the Wireless Sensor
Setup task. If an update is available, the Firmware Update Available button
will be activated in the display. For more information, see “Updating the
Wireless Sensor Pod” on page 22.
Sensor Name Range Part Number
NetBotz Wireless Sensor Pod 180 100 ft -
line of
sight
NBPD0180
NetBotz USB Coordinator & Router 100 ft -
line of
sight
NBWC100U
Sensor Name Range Part Number
NetBotz Wireless Sensor Pod 180 100 ft -
line of
sight
NBPD0180
NetBotz Wireless Temperature Sensor 100 ft -
line of
sight
NBWS100T
NBWS100H