User manual

Local Configuration 41
Doc: HMSI-168-92 Rev: 3.00Netbiter EasyConnect Gateway User Manual
9.4.3 GPRS/Ethernet Failover Settings
Connection Mode
Connection Time Before Restore to Ethernet
SetsthetimebeforethegatewayshouldretrytheEthernetconnectionafterafailoverto
GPRS.ThecyclewillberepeateduntilEthernetcommunicationhasbeenreestablished.
Access Point Name (APN)
Theidentifyingnameusedtoconnecttoamobilenetwork.Thenetworkoperatorforthe
SIMcardcansupplythisinformation.
User name / Password
Required
bysomemobilenetworkoperators.
ClickSavesettingstosavechanges.
Connection mode Explanation
GPRS only Ethernet disabled (default mode)
Ethernet failover to GPRS The unit will automatically switch to GPRS if Ethernet connection is lost.
Ethernet only GPRS modem disabled