User manual

Local Configuration 40
Doc: HMSI-168-92 Rev: 3.00Netbiter EasyConnect Gateway User Manual
9.4 Netbiter EC250
9.4.1 Login
EntertheIPaddressofthegatewayinawebbrowsertologin.Thedefaultusernameis
admin,andthepasswordistheactivationcodesuppliedwiththeunit.
Theonlychangesthatshouldbemadelocallyarethesettingsforthenetworkconnection
andthePINcode.All
othersettingsareprovidedfortroubleshootingandinformational
purposesonly.ChangesmadetotheseothersettingswillnotbesynchronizedwithNet‐
biterArgos.
9.4.2 Modem Settings/PIN code
IfusingaSIMcardwithanactivePINcode,clickEnableandenterthePINcodeprovided
bythecardsupplier.ClickTestPINtotestthePINcode.
! Thissettingcannotactivate/deactivatePINcodesecurityorchangethePINcodeon
theSIMcard.Todothis,installtheSIMcardinamobilephoneandfollowthein‐
structionsfromthemanufacturer.