User manual

Configure Remote Access in QuickConnect 33
Doc: HMSI-27-240, Rev: 1.2
Netbiter Remote Access User Manual
7.1.6. Add a New Channel to a Tunnel Configuration
Now that there is a main tunnel configured between the PC and the remote device/network, it is also
possible to add further channels to the configuration. Simply click the + Add New Channel link to add.
Note that there are no limitations on which channels (Network bridge, TCP/UDP or serial) can be add-
ed to the main tunnel configuration. This makes it possible to gather all of the connectivity required for
a single device in one and the same configuration. In the example below there are 3 different channels
within the same tunnel configuration.
3 channels in same
tunnel