User manual

Configure Remote Access in QuickConnect 28
Doc: HMSI-27-240, Rev: 1.2
Netbiter Remote Access User Manual
7.1. Configure a System for Remote Access
1. Click on a system name in the list to go that system’s configuration page, which when empty will
look something like this:
2. Click + Add New Device
to add a tunnel configuration for the device to be accessed remotely.
This displays a list of available pre-configured devices.
3. Select a device from the list to configure the connection.
4. When the configuration page opens, enter the required information in the fields provided. It may
be necessary to consult the device’s own documentation for some or all of these settings.
If the device to use is not in the list, select the Custom device. See page 32.