User manual

Installation - Existing Netbiter Argos Account 20
Doc: HMSI-27-240, Rev: 1.2
Netbiter Remote Access User Manual
Indicating Signal Strength
For an indication of the mobile network signal strength, press and release the Mode button on the top
of the Netbiter EasyConnect EC350. The top 5 LEDs (i.e. all except the Power LED) on the front panel
will now indicate the signal strength according to the following:
• 1 Solid Red LED: No/unknown signal
• 1 Solid Orange LED: Poor signal
• 1 Solid Green LED: OK signal
• 2-5 Solid Green LEDs: Good to optimum signal
To improve the signal, try replacing the stub antenna with a 5m extension antenna, and/or re-position
the antenna for better reception.
The LEDs will automatically return to showing the standard indications after 60 seconds.